Remote Alarm Indicator

£67.80 Excl. Tax: £56.50

The ALD-RAI has been designed to be a simple Remote Alarm indicator which can be located in both domestic and commercial environments. The unit is designed to harmonise with standard UK electrical accessories and can be fitted to a standard 35mm deep single gang surface, flush or plasterboard back box as well as Dado trunking frames.

 Download Data Sheet
 Installation Instructions

Only 3 left in stock


Offering a compact aesthetically pleasing solution to alarm annunciation in commercial and domestic environments. The ALD-RAI Remote Alarm Indicator in white harmonises with today’s modern design ethos.
The small unit which is the same size as a UK single socket can be fitted to flush or surface socket boxes and Dado trunking.

The unit has a high brightness LED. This flashes when an alarm condition is detected. The unit also has a 95dB sounder with a mute button.

Simple Installation

Typical installation of the ALD-RAI is carried out using a 4 core flexible cable which allows the power supply to the unit to be fed from the remote location. If a power supply is to be sited close to the Remote Alarm Indicator only a 2 core cable is needed for the monitored equipment.

Suitable cables are:

Aquentis Jumper cable:
2 Core CAEA-JC2
4 Core CAEA-JC4

Adaptable Designed Remote alarm

The unit can be set in one of 3 modes:

  • Visual only where the L.E.D. flashes with no sounder.
  • Audible only where the sounder pulses with no L.E.D.
  • Audible and visual where both the sounder and L.E.D. operate.

The Remote Alarm Indicator is the same size as a standard UK single socket. This allows it to be mounted flush or on the surface using widely available back boxes.

Additional information

Weight 0.26 kg


Part number:  ALD-RAI-W
Material:  Flame retardant Phenolic
Colour:  White
Power supply: 12/24Vdc (12V recommended)
Power consumption: 20mA @ 12Vdc
40mA @ 24Vdc
Operating Conditions: -10 to +50◦C, 0% to 90% non-condensing
Status LED: Alarm ( High brightness Blue flashing)
Sounder: Maximum 95dB (dependant on back box used)
Trigger: Volt free clean contacts Close on alarm
Dimensions: HxWxD 85mm x 85mm x 33.8mm
Weight: 72g
Screw fixings: 60mm centres (standard UK single socket box)